Vision Path: Difference between revisions

From YSTV Documentation Wiki
(outdated)
 
(17 intermediate revisions by 4 users not shown)
Line 1: Line 1:
This page is intended as a rough guide of the video path. Mainly you cvan assume it to be correct, however, it probably isn't. A full, up-to-date copy of the vision path wiring can be found in:
{{HDOK}}


'''Userdata>Docs>tech>signalpaths>vision'''
{{outofdate}}


With the latest date.
Following an upgrade in October 2013, YSTV went fully HD and updated it's video routing system both in studio and for OBs. The current system is as follows.  


Monitor rack connections vary rapidly according to requirements, and so are not here - sorry, but they will only add to the confusion!
== Equipment ==
=== Sources ===


==<u>Main Mux Inputs:</u>==
There are a number of sources that feed video into the video path:
{|border="1"
|-
!'''Input No.'''
!'''Device'''
!'''From'''
!'''Cable No.'''
|-
!1
!VidServ
!DA101op
!V1
|-
!2
!Ext 1
!Patch Panel ##?
!V2
|-
!3
!Ext 2
!Patch Panel ##?
!V3
|-
!4
!Ext 3
!Patch Panel ##?
!V4
|-
!5
!DEAD
!DEAD
!N/A
|-
!6
!
!
!
|-
!7
!
!
!
|-
!8
!
!
!
|-
!9
!Net
!DA108op
!V9
|-
!10
!
!
!V10
|-
!11
!
!
!
|-
!12
!DVD Out
!DVD
!V12
|-
!13
!Kramer PiP
!Kramer PiP
!V13
|-
!14
!VT A
!DA110op
!V14
|-
!15
!VT B
!DA111op
!V15
|-
!16
!Black&Burst
!DaVE B&B
!V16
|-
!17
!
!
!V17
|-
!18
!Howard
!?????
!V18
|-
!19
!Inform
!DA102op
!V19
|-
!20
!Clock
!DA103op
!V20
|-
!21
!Gfx PC
!DA206op
!V21
|-
!22
!DaVE Out
!DA112op
!V22
|-
!23
!Ctrl Rm Cam
!Patch Panel 67
!V23
|-
!24
!Studio Cam
!Patch Panel 55
!V24
|-
!25
!Cam 1
!DA207op
!V25
|-
!26
!Cam 2
!DA208op
!V26
|-
!27
!DEAD
!DEAD
!
|-
!28
!Cam 3
!DA209op
!V28
|-
!29
!Cam 4
!DA210op
!V29
|-
!30
!
!
!
|-
!31
!
!
!
|-
!32
!VT PC op
!DA205op
!V32
|}
.
.
.
.


==<u>Blank table:</u>==
* [[Panasonic AG-AC90| Camera's]]
* [[Computing:Graphics PC | Graphics PC]] is fed directly into the ATEM via HDMI using [[Caspar|Caspar]]
* [[Computing:Video Server | Video Playout Server]]
* [[Computing:Ystvstrmre | Stream Reciever]]
* [[Patch Panels|Patching panels]] if the vision stream is passing through the studio and control room.


{|border="1"
=== Mixing ===
|-
 
!
* [[ATEM 1 M/E | The Switcher]]
!DA 01
* [[Micro Videohub | The Hub]]
!DA 02
 
!DA 03
Which of the 2 YSTV ATEMs is used on any given production depends on which of the [[OB units|OB Units]] is used on that production. (see information about the ATEMS both on the ATEM page and the OB units pages).
!DA 04
 
!DA 05
The videohub also is only in one unit but can be re-racked if necessary.
!DA 06
 
!DA 07
== Stream path ==
!DA 08
The streaming system from the OB unit output is bounced through several places before it makes it's way to the website. This will be the same for a studio show since the practice is now to use OB units in place of a permanently racked studio system. The system runs as follows.
!DA 09
 
!DA 10
* [[OB units|OB Unit]] - Whichever is being used.
!DA 11
* rtmp://ystvstrm7.york.ac.uk/live/stream1 - The stream is sent to the STRM7 VM server
!DA 12
* [[Transcode Machines|transcode0]] - Our [[Transcode Machines|transcode machines]] which produce the variable formats that the stream can be viewed in.
!DA 13
* rtmp://ystvstrm7.york.ac.uk/stream/stream1_(1080/720/480/360) - The addresses for the various produced video qualities of the stream 
|-
* http://ystv.co.uk/watch/live - the repository address for the final stream where it's hosted on our site.
!INPUT
 
!
 
!
[[Category:Vision Path]]
!
!
!
!
!
!
!
!
!
!
!
|-
!
!
!
!
!
!
!
!
!
!
!
!
!
!
|-
!
!
!
!
!
!
!
!
!
!
!
!
!
!
|-
!
!
!
!
!
!
!
!
!
!
!
!
!
!
|-
!
!
!
!
!
!
!
!
!
!
!
!
!
!
|-
!
!
!
!
!
!
!
!
!
!
!
!
!
!
|-
!
!
!
!
!
!
!
!
!
!
!
!
!
!
|-
!
!
!
!
!
!
!
!
!
!
!
!
!
!
|}

Latest revision as of 11:10, 16 November 2022

tick.png HD OK
cancel.png Information on this page may be out of date or apply to old equipment. Use with caution.

Following an upgrade in October 2013, YSTV went fully HD and updated it's video routing system both in studio and for OBs. The current system is as follows.

Equipment

Sources

There are a number of sources that feed video into the video path:

Mixing

Which of the 2 YSTV ATEMs is used on any given production depends on which of the OB Units is used on that production. (see information about the ATEMS both on the ATEM page and the OB units pages).

The videohub also is only in one unit but can be re-racked if necessary.

Stream path

The streaming system from the OB unit output is bounced through several places before it makes it's way to the website. This will be the same for a studio show since the practice is now to use OB units in place of a permanently racked studio system. The system runs as follows.

  • OB Unit - Whichever is being used.
  • rtmp://ystvstrm7.york.ac.uk/live/stream1 - The stream is sent to the STRM7 VM server
  • transcode0 - Our transcode machines which produce the variable formats that the stream can be viewed in.
  • rtmp://ystvstrm7.york.ac.uk/stream/stream1_(1080/720/480/360) - The addresses for the various produced video qualities of the stream
  • http://ystv.co.uk/watch/live - the repository address for the final stream where it's hosted on our site.