bookings admins, confluence-users, domain admins, domain users, jira-users, stash-users, watch admins
137
edits
Behringer X32 Compact: Difference between revisions
From YSTV Documentation Wiki
no edit summary
No edit summary |
No edit summary |
||
| Line 27: | Line 27: | ||
One of the biggest reasons we bought this specific board, is it's internal set of scribble strips. These are basically a fancy term for light-up writable labels which sit above the faders and allow operators to give them a name and a symbol for the sake of identification. This can be super useful when things go wrong (they do a lot) or when setting up a complex or larger scale rig. | One of the biggest reasons we bought this specific board, is it's internal set of scribble strips. These are basically a fancy term for light-up writable labels which sit above the faders and allow operators to give them a name and a symbol for the sake of identification. This can be super useful when things go wrong (they do a lot) or when setting up a complex or larger scale rig. | ||
They're easy to use, use the inbuilt screen to navigate to the correct scribble strips tab where you can set a colour, name and symbol for every input and output layer. These should also update with scene changes | They're easy to use, use the inbuilt screen to navigate to the correct scribble strips tab where you can set a colour, name and symbol for every input and output layer. These should also update with scene changes. | ||
===FX=== | |||
The X32 also has an internal effects generator, which we kind of don't use but probably should. There's a bunch of decent effects, mainly reverb and delays that would be good for music performances. Or for messing with people when they're listening to the feedback. Your choice. | |||
===Groups=== | |||
Both the Producer and the Compact come with the ability to group multiple channels together for ease of use. To group channels; | |||
* Press the groups button on the layers listed buttons on the right side of the board. | |||
* Select the group (1-8) and press and hold the select button (button will light green) | |||
* Press the required input faders (this can be across multiple layers) select buttons | |||
This allows for multiple feeds to be represented by 1 fader, making setups with multiple microphones which have to come on at the same time or go off at the same time simpler to manage. However, this only applies when the output feed can be at a uniform gain irrespective of the input volume gain. This makes it better for use when the group of sources is going to have roughly the same volume and levels throughout. | |||
===Busses=== | |||
Using the same principle, a number of feeds can be represented on a single bus fader which is then sent to the output mix using sends on fader. They vary from groups in that they can output a varying grain mix, so the main output levels for the grouped signals can be different to the output of the bus. This allows for the bus to send a signal to a stage box or other monitor at a different level across the mix compared to the main LR output of the board. | |||
===Useful=== | |||
* Scenes can be saved of the current setup of the board which includes levels and EQ settings. We keep a few scenes in the repository as basics that can start off a new operator at the start of setup. These are just simple level and EQ assumptions for studio and OB setups. 3 are also in for the internal sound system ([[Control Room audio|Control room PC audio system]]). The presets will bring up both of the edit desks to playout through either the control room, studio or both. | |||
* Feel free to use these scenes and to create more for OBs and shows that are likely to be repeated. Just don't overwrite any of them unless you know they're not being used. | |||
* Scenes will keep the bus and groups in them, so any short cuts programmed in will be reflected in the loaded scene. | |||
* '''NAME YOUR SCENES''' | |||
* Finish your scene before you save and walk away, anything changed after hitting save won't be saved and you'll have to save over the top of it. | |||
* The Compact (and the [[Behringer X32 Producer|Producer]] for that matter) both have USB slots on the top near the screen which allow for the offloading or re-loading of scenes for the purpose of backup. | |||
* For a large show, like Roses, it is recommended to have multiple copies of the show on USB drives and the board to avoid accidental deletion and alterations. Just don't lose the stick. | |||
* '''For more information''' see the user manual [https://media63.musictribe.com/media/PLM/data/docs/P0AAP/X32-COMPACT_M_EN.pdf here] | |||
