Anonymous

OB:Woodstock 2013: Difference between revisions

From YSTV Documentation Wiki
no edit summary
(Created page with " == Plans == The plans for this were largely the same as the plans for the previous year, partly due to the thoroughness of those plans. == Preparation == In the week leadin...")
 
No edit summary
Line 1: Line 1:


== Plans ==
== Plans ==
The plans for this were largely the same as the plans for the previous year, partly due to the thoroughness of those plans.  
The plans for this were largely the same as the plans for the previous year, partly due to the thoroughness of those plans. There were a number of minor changes however. URY's desk was replaced with a borrowed ZED 428 from bandsoc, fed with 24 channels sent through bandsocs borrowed multicore from JSS' stage block. Two 3' x 6' on 1' legs were also hired from JSS for the indoor stage cameras. The decision was also taken to run the indoor stage cameras on their own BNC cables instead of through the cat 5 balun and to place a rifle mic in the indoor stage. A cat 5 cable was also run as a backup cable. URY also agreed to loan us a rudicously long coax reel to help with our cabling runs. Another minor difference was to loop the video feeds through the mux instead if through the monitors.


== Preparation ==
== Preparation ==
In the week leading up to Woodstock, the technical team decided they would attempt to prepare the entire vision path for both stages in the studio. This worked reasonably well, with many issues discovered and solved before rigging started on the Friday.  
In the week leading up to Woodstock, the technical team decided they would attempt to prepare the entire vision path for both stages in the studio. This worked reasonably well, with many issues discovered and solved before rigging started on the Friday. One of these was the discovery of variou odd interference patterns caused by [[The Mux|the mux]] on certain channels. This was solved by changing channels until all the feeds were clear from problems.


== Rigging ==
== Rigging ==
Due to issues with booking rooms, access to various rooms was restricted until the afternoon. Despite this, rigging went reasonably well on Friday with few issues.
Due to issues with booking rooms, access to various rooms was restricted until the afternoon. Despite this, rigging went reasonably well on Friday with few issues. For the main stage cable run, a long length of rope was stretched out of the control room to the bridge at the bottom of the covered area and back again. The ends of the cables were then attached onto the rope, and the cables pulled along the covered area. The cables were also taped together just before they went through the window to help with the derig. This method greatly reduced the time required for the run, with the longest holdup caused by a car 5 cable running out unexpectedly before the run was finished. A coupler, spare reel and lots of tape quickly solved that issue. The indoor and URY runs were accomplished in a similar way - a length of rope was stretched between the control room and the balcony. This was then used to pull the cables across (without dropping them on the heads of the public) to members of URY who then split the cables into the ones going to them and the rest for the indoor stage.
camera trained, confluence-users, coshh trained, crowd-administrators, domain admins, domain users, jira-administrators, jira-developers, jira-users, ladder trained, lighting trained, stash-users, webdev
392

edits