Strand 200+: Difference between revisions
From YSTV Documentation Wiki
mNo edit summary |
(Changed some formatting and added a picture) |
||
| Line 1: | Line 1: | ||
The current desk in use in the studio is the Strand 200+. If you are looking for information on the old desk, see [[Zero88 sirius 24]] | {{Centre|''The current desk in use in the studio is the Strand 200+. If you are looking for information on the old desk, see [[Zero88 sirius 24]]''}} | ||
[[File:Strand 200+.JPG|right|thumb|200px|The Strand 200+ DMX lighting control desk]] | |||
== Specifications == | == Specifications == | ||
1 DMX Universe output | *1 DMX Universe output | ||
48 Channels | *48 Channels | ||
24 Faders | *24 Faders | ||
2 Independent Channels | *2 Independent Channels | ||
== Turning on == | == Turning on == | ||
Revision as of 08:47, 16 July 2013
The current desk in use in the studio is the Strand 200+. If you are looking for information on the old desk, see Zero88 sirius 24
Specifications
- 1 DMX Universe output
- 48 Channels
- 24 Faders
- 2 Independent Channels
Turning on
The desk switch is on the back of the board, on the right hand side near the power input. The monitor switch is on the bottom right hand side of the monitor
Normal Use
Firstly, make sure the Grand Master is at 100%. Then check the A/B masters are at 100% (B is reversed). Then make sure the "Two-scene" button is lit up. Now the faders each correspond to a dimmer channel.
Manual
For any further information, there should be a manual kept ether under or near the desk. Otherwise it is available here: [1].
