Search results

...ng the Greg Dyke donation. Since then, it had been residing in the control room racks as part of a permanent studio broadcast rig.

...d to a headset, which is then linked back to a director box in the control room; all over 3-pin XLR cable. It is a party line system, so everyone on a dire ...end, headphone connectors and a talk switch on the other end and a volume control down one side. Headphones and microphones use a standard 3.5mm jack, so PC

...right|alt=Tally control unit and blocks|The Tally system: four bricks, the control unit and splitter]] ...of the lines in the Cat-5 cable plugged into the rear can be driven by the control unit, and if that line is selected by the switch, the LEDs will illuminate.

*4-band equalisation (or EQ, frequency-specific volume control) on each channel (sweepable/semi-parametric mid bands on the mono channels) ...he helpfully named 'INSERT' sockets. The matrices outputs feed the control room amplifier, and any two of auxes 3-6 can be used to feed the studio amp if 3

*9 stereo inputs (4 on channels 9-16; 4 on inputs A-C with limited control; 1 on two track input ("2TK IN")) *"Control Room" stereo output - linked to PFL (pre-fade listen)

...ng with a client to provide a director with record/stream controls, matrix controls, a running order and potentially internal IRC in one handy window. ...t holiday being long gone, the plan was to repaint both studio and control room, re-carpet both and generally make the place look nicer. Sort of a tech pro

...generally wheeled out for OBs, and often features in the Woodstock control room as the programme output. === Control Protocol ===

...including signatories and memberships; ## Arranging meetings and booking rooms or venues; ##To ensure the upkeep of any rooms occupied by YSTV and ensure accessibility for all members, and to maintai

...ystem was built before the move to [[hist:G/046|G/046]]). Additionally the controller had a rather noisy switch to advance the display, making it difficult to ...talled during 2013, with the mostly built frame sat on a table in the tech room. It was eventually completed in May 2014. Due to an abundance of tripods, a