Power standards

Revision as of 09:47, 23 July 2021 by Connor.sanders (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

A number of different power supplies are used around the station.

XLR-4 (4-core)

In February 2014, the umbilical power cables were replaced with 4-core cable. This was to allow both 12V and 8.7V on the same cable but different pins, avoiding the possibility of the wrong voltage being connected

Pin-out

  • 1 = Ground (yellow/green)
  • 2 = 5V (brown)
  • 3 = 8.7V (black)
  • 4 = 12V (grey)

Standardised devices

Previous standards

These standards were once in service, but have since been removed or superseded.

XLR-4 12V

These are 12V supplies of different current ratings, all ended with female 4-pin XLR connectors. This was superseded by the above XLR-4 standard.

Pin-out

  • 1 = Ground
  • 2 = unconnected
  • 3 = unconnected
  • 4 = +12V

XLR-4 8.7V

Similar to the 12V XLR-4's, but only 8.7V on pin 4. They are used for powering the Sony HD cameras. This was superseded by the above XLR-4 standard.

Pin-out

  • 1 = Ground
  • 2 = unconnected
  • 3 = unconnected
  • 4 = +8.7V