ATEM 1 M/E

HD OK

The Blackmagic Design ATEM 1 M/E Production Switcher is the main vision mixer used in the HD Vision Path

Connections

Inputs

The ATEM has the following inputs:

• 4 HDMI
• 4 HD-SDI
• 1 Analog (composite, s-video or component switchable) - replaces the first HDMI input

This allows for a total of 8 simultaneous inputs.

All inputs must be of the same format (which is set within the ATEM Control Software) otherwise the input will not be shown. As our camera's can only output either 1080i50 or 576i50, we are limited to one of these formats for the entire vision path

Outputs

The ATEM has the following outputs:

• 1 HD-SDI program
• 1 SDI program
• 1 Analog composite
• 1 HDMI program
• 1 HD-SDI Multiview
• 1 HDMI Multiview
• 1 HD-SDI Preview
• 3 HD-SDI Auxilary
• 1 Analog Component

Control

The control software that shipped with the ATEM is stored on the software drive.

There is currently plans to build a control panel for the ATEM.