Power standards: Difference between revisions
From YSTV Documentation Wiki
(Created page with "A number of different power supplies are used around the station. == XLR-4 12V == These are 12V supplies of different current ratings, all ended with female 4-pin XLR connect...") |
mNo edit summary |
||
| (12 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
A number of different power supplies are used around the station. | A number of different power supplies are used around the station. | ||
== XLR-4 (4-core) == | |||
In February 2014, the umbilical power cables were replaced with 4-core cable. This was to allow both 12V and 8.7V on the same cable but different pins, avoiding the possibility of the wrong voltage being connected | |||
=== Pin-out === | |||
*1 = Ground (yellow/green) | |||
*2 = 5V (brown) | |||
*3 = 8.7V (black) | |||
*4 = 12V (grey) | |||
=== Standardised devices === | |||
*[[Sony HVR-HD1000E]] (HD cameras) - 8.7V | |||
*[[Sony DSR-PD150]] (Ex-BBC cameras) - 8.7V | |||
*[[Panasonic AG-AC90]] - 12V (Currently issues with distance) | |||
*[[Vestel monitors]] - 5V and 12V | |||
*[[Battery Converters|Blackmagic Battery Converters]] - 12V | |||
*Analogue to SDI converters - 5V | |||
*Pretty much anything with 12V | |||
= Previous standards = | |||
These standards were once in service, but have since been removed or superseded. | |||
== XLR-4 12V == | == XLR-4 12V == | ||
These are 12V supplies of different current ratings, all ended with female 4-pin XLR connectors. | |||
These are 12V supplies of different current ratings, all ended with female 4-pin XLR connectors. This was superseded by the above XLR-4 standard. | |||
=== Pin-out === | === Pin-out === | ||
| Line 11: | Line 35: | ||
== XLR-4 8.7V == | == XLR-4 8.7V == | ||
Similar to the 12V XLR-4's, but only 8.7V on pin 4. They are used for powering the [[Sony HVR-HD1000E|Sony HD]] cameras. | |||
Similar to the 12V XLR-4's, but only 8.7V on pin 4. They are used for powering the [[Sony HVR-HD1000E|Sony HD]] cameras. This was superseded by the above XLR-4 standard. | |||
=== Pin-out === | === Pin-out === | ||
| Line 19: | Line 44: | ||
*4 = +8.7V | *4 = +8.7V | ||
[[Category: | [[Category:Tutorials]] | ||
[[Category:Power]] | [[Category:Power]] | ||
Latest revision as of 09:47, 23 July 2021
A number of different power supplies are used around the station.
XLR-4 (4-core)
In February 2014, the umbilical power cables were replaced with 4-core cable. This was to allow both 12V and 8.7V on the same cable but different pins, avoiding the possibility of the wrong voltage being connected
Pin-out
- 1 = Ground (yellow/green)
- 2 = 5V (brown)
- 3 = 8.7V (black)
- 4 = 12V (grey)
Standardised devices
- Sony HVR-HD1000E (HD cameras) - 8.7V
- Sony DSR-PD150 (Ex-BBC cameras) - 8.7V
- Panasonic AG-AC90 - 12V (Currently issues with distance)
- Vestel monitors - 5V and 12V
- Blackmagic Battery Converters - 12V
- Analogue to SDI converters - 5V
- Pretty much anything with 12V
Previous standards
These standards were once in service, but have since been removed or superseded.
XLR-4 12V
These are 12V supplies of different current ratings, all ended with female 4-pin XLR connectors. This was superseded by the above XLR-4 standard.
Pin-out
- 1 = Ground
- 2 = unconnected
- 3 = unconnected
- 4 = +12V
XLR-4 8.7V
Similar to the 12V XLR-4's, but only 8.7V on pin 4. They are used for powering the Sony HD cameras. This was superseded by the above XLR-4 standard.
Pin-out
- 1 = Ground
- 2 = unconnected
- 3 = unconnected
- 4 = +8.7V
