Strand 200+: Difference between revisions
From YSTV Documentation Wiki
(Created page with "The current desk in use in the studio is the Strand 200+. If you are looking for information on the old desk, see Zero88 sirius 24 == Specifications == 1 DMX Universe out...") |
mNo edit summary |
||
| Line 20: | Line 20: | ||
[[Category:Technical]] | [[Category:Technical]] | ||
[[Category:Lighting]] | [[Category:Lighting]] | ||
[[Category:Equipment]] | |||
Revision as of 15:27, 11 July 2013
The current desk in use in the studio is the Strand 200+. If you are looking for information on the old desk, see Zero88 sirius 24
Specifications
1 DMX Universe output 48 Channels 24 Faders 2 Independent Channels
Turning on
The desk switch is on the back of the board, on the right hand side near the power input. The monitor switch is on the bottom right hand side of the monitor
Normal Use
Firstly, make sure the Grand Master is at 100%. Then check the A/B masters are at 100% (B is reversed). Then make sure the "Two-scene" button is lit up. Now the faders each correspond to a dimmer channel.
Manual
For any further information, there should be a manual kept ether under or near the desk. Otherwise it is available here: [1].
