Transmission Light: Difference between revisions
From YSTV Documentation Wiki
(DB9 pinout) |
No edit summary |
||
| Line 6: | Line 6: | ||
== Relay control cable == | == Relay control cable == | ||
Cat5 cable terminated with DB9. | Cat5 cable terminated with DB9. | ||
* pin 1 = tx +12v | * pin 1 = tx +12v (Orange) | ||
* pin 2 = tx GND | * pin 2 = tx GND (Brown) | ||
* pin 3 = rh +12v | * pin 3 = rh +12v (Blue) | ||
* pin 4 = rh GND | * pin 4 = rh GND (Green) | ||
[[Category:Technical]] | [[Category:Technical]] | ||
[[Category:Live]] | [[Category:Live]] | ||
Revision as of 11:09, 5 May 2019
This is the thing that says whether you are transmitting, rehearsing, or both.
Design
It is currently controlled by Arduino (for serial control) triggered relays - hopefully having the Arduino and transistors on the same board soon
Relay control cable
Cat5 cable terminated with DB9.
- pin 1 = tx +12v (Orange)
- pin 2 = tx GND (Brown)
- pin 3 = rh +12v (Blue)
- pin 4 = rh GND (Green)
