Transmission Light: Difference between revisions

From YSTV Documentation Wiki
mNo edit summary
No edit summary
 
(6 intermediate revisions by 2 users not shown)
Line 1: Line 1:
This is the thing that says whether you are transmitting, rehearsing, or both.
This is the indicator light that says whether you are rehearsing, transmitting or both.


== Design ==
== Design ==
It is currently controlled by Arduino (for serial control) triggered relays - hopefully having the Arduino and transistors on the same board soon
This light is controlled by an Arduino using GET requests over ip, this then triggers the corresponding relays.


== Relay control cable ==
You send commands to it in the format of <IP address>/?[request].
Cat5 cable terminated with DB9.
 
* pin 1 = tx +12v (Orange)
The code and schematic can be viewed [https://github.com/ystv/transmission-light here].
* pin 2 = tx GND (Brown)
 
* pin 3 = rh +12v (Blue)
== Relay control get requests ==
* pin 4 = rh GND (Green)
* Turn on rehearsal light - <IP address>/?rehearsal_on
* Turn on transmission light - <IP address>/?transmission_on
* Turn on both rehearsal and transmission light - <IP address>/?rehearsal_transmission_on
* Turn off both rehearsal  lights - <IP address>/?rehearsal_transmission_off


[[Category:Technical]]
[[Category:Technical]]
[[Category:Production]]

Latest revision as of 01:45, 10 October 2021

This is the indicator light that says whether you are rehearsing, transmitting or both.

Design

This light is controlled by an Arduino using GET requests over ip, this then triggers the corresponding relays.

You send commands to it in the format of <IP address>/?[request].

The code and schematic can be viewed here.

Relay control get requests

  • Turn on rehearsal light - <IP address>/?rehearsal_on
  • Turn on transmission light - <IP address>/?transmission_on
  • Turn on both rehearsal and transmission light - <IP address>/?rehearsal_transmission_on
  • Turn off both rehearsal lights - <IP address>/?rehearsal_transmission_off