admin team group, administrators, computing team, computing team group, domain admins, domain users, livestream distribution, livestream technicians, old calendar, producers, stv admin
65
edits
Studio Setup: Difference between revisions
→Vision/Audio Path
(Move information to separate OnTime page) |
|||
| (5 intermediate revisions by the same user not shown) | |||
| Line 3: | Line 3: | ||
SDI patches 91-94 are routed from the studio into cameras 1-4 on the ATEM Television Studio 4K in the control room. | SDI patches 91-94 are routed from the studio into cameras 1-4 on the ATEM Television Studio 4K in the control room. | ||
: The wire for camera 4 in the loom is dodgy and needs replacing, for now it's hard-patched. [[User:Marks.polakovs|Marks.polakovs]] ([[User talk:Marks.polakovs|talk]]) 11:21, 16 November 2022 (UTC) | : The wire for camera 4 in the loom is dodgy and needs replacing, for now it's hard-patched. [[User:Marks.polakovs|Marks.polakovs]] ([[User talk:Marks.polakovs|talk]]) 11:21, 16 November 2022 (UTC) | ||
SDI 95 is patched to one of the ATEM's non-program outputs, for use with camera control and tally (there's a SDI splitter on the studio side that runs it into the cameras, to avoid needing to run four more SDIs from the studio). | |||
The ATEM's program out is patched into SDI 0 on edit2's DeckLink for broadcast (usually through OBS). | The ATEM's program out is patched into SDI 0 on edit2's DeckLink for broadcast (usually through OBS). | ||
| Line 15: | Line 18: | ||
:* Audio onto SDI, into a de-embedder, into X32 - spenny money (the Decimator can do it, but it's a bit overkill and a waste of a decimator) | :* Audio onto SDI, into a de-embedder, into X32 - spenny money (the Decimator can do it, but it's a bit overkill and a waste of a decimator) | ||
: Further tinkering is required. [[User:Marks.polakovs|Marks.polakovs]] ([[User talk:Marks.polakovs|talk]]) 11:21, 16 November 2022 (UTC) | : Further tinkering is required. [[User:Marks.polakovs|Marks.polakovs]] ([[User talk:Marks.polakovs|talk]]) 11:21, 16 November 2022 (UTC) | ||
:: Could also be that Caspar is configured to use too high a latency. Worth experimenting, but that path may end up futile - per the Caspar developers, [https://casparcgforum.org/t/5-1-audio-via-system-audio-or-asio/2702/5 system audio is intended for testing, and is "not in sync to the decklink"]. [[User:Marks.polakovs|Marks.polakovs]] ([[User talk:Marks.polakovs|talk]]) 12:06, 16 November 2022 (UTC) | |||
: More or less settled on using the [[Decimator]] MD-DUCC as an audio de-embedder, unless we decide at some point to get an actual de-embedder (which I'm not fully convinced is a valuable use of money). [[User:Marks.polakovs|Marks.polakovs]] ([[User talk:Marks.polakovs|talk]]) 14:37, 6 December 2022 (UTC) | |||
Caspar is controlled using a Stream Deck running BitFocus Companion. As a nice bonus, this can be set up to trigger the VT, transition the ATEM, fade up the X32, and trigger OnTime, all with one button press. | Caspar is controlled using a Stream Deck running BitFocus Companion. As a nice bonus, this can be set up to trigger the VT, transition the ATEM, fade up the X32, and trigger [[OnTime]], all with one button press. | ||
== TV Graphics == | == TV Graphics == | ||
The TV in the studio (usually on [[Tom Lee]]) is connected (via a Micro Converter) into SDI patch {{unsure|71}}, which is connected into the AUX output on the ATEM. This is usually set to show Media Player 2, but can be changed (press the AUX button on the top-right, under MENU, then select the output you want on the program row). | |||
= OnTime = | = OnTime = | ||