Sony HVR-HD1000E: Difference between revisions
From YSTV Documentation Wiki
(Created page with "These are the main HD camera's currently used in YSTV. == Power == These camera's are picky in that they need 8.7V through a propriety connector. There is an adapter cable-ti...") |
mNo edit summary |
||
| Line 3: | Line 3: | ||
== Power == | == Power == | ||
These camera's are picky in that they need 8.7V through a propriety connector. There is an adapter cable-tied to each camera to allow the use of 4-pin XLR to provide power. However, care must be taken to avoid plugging a 12V supply into the camera's. Doing this turns the camera into a tape muncher, among other problems. | These camera's are picky in that they need 8.7V through a propriety connector. There is an adapter cable-tied to each camera to allow the use of 4-pin XLR to provide power. However, care must be taken to avoid plugging a 12V supply into the camera's. Doing this turns the camera into a tape muncher, among other problems. | ||
[[Category:Technical]] | |||
[[Category:Camera]] | |||
Revision as of 10:14, 14 August 2013
These are the main HD camera's currently used in YSTV.
Power
These camera's are picky in that they need 8.7V through a propriety connector. There is an adapter cable-tied to each camera to allow the use of 4-pin XLR to provide power. However, care must be taken to avoid plugging a 12V supply into the camera's. Doing this turns the camera into a tape muncher, among other problems.
