Monitor Rack: Difference between revisions

From YSTV Documentation Wiki
No edit summary
mNo edit summary
 
(One intermediate revision by one other user not shown)
Line 9: Line 9:
== Signal ==
== Signal ==


The monitors are connected to the OB unit currently being used in the studio via a COAX cable to a distribution panel near the unit behind the sound station which is converted from HDMI by a [[Blackmagic Micro Converter|converter]].
The monitors are connected to the OB unit currently being used in the studio via a COAX cable to a distribution panel near the unit behind the sound station which is converted from HDMI by a [[Blackmagic Micro Converters|converter]].


The [[Computing:Stream Encode Server|Stream]] monitor is fed directly via HDMI from a capture card in the server rack.
The [[Computing:Stream Encode Server|Stream]] monitor is fed directly via HDMI from a capture card in the server rack.


[[Category:Technical]]
[[Category:Vision Path]]
[[Category:Vision Path]]

Latest revision as of 09:30, 23 July 2021

tick.png HD OK
The monitor rack as of 11/11/2013. HEY FIX THIS NEED A NEW PHOTO

This is where we place all the monitors to allow us to see what's happening at different parts of the vision path. Mainly it contains the large multiview screen for the vision mixer and the director.

Power

The monitor rack is fed power from circuits 1 and 2 in the control room. Circuit 1 powers the left side, while 2 does the right.

Signal

The monitors are connected to the OB unit currently being used in the studio via a COAX cable to a distribution panel near the unit behind the sound station which is converted from HDMI by a converter.

The Stream monitor is fed directly via HDMI from a capture card in the server rack.