Monitor Rack: Difference between revisions

From YSTV Documentation Wiki
mNo edit summary
mNo edit summary
 
(5 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{HDunsure}}
{{HDOK}}
[[File:Monitor Rack.JPG|400px|right|thumb|The monitor rack as of 15/05/2013. The YSTV logo is showing on the commonly used monitors]]
[[File:Monitor Rack.JPG|400px|right|thumb|The monitor rack as of 11/11/2013. HEY FIX THIS NEED A NEW PHOTO]]
This is where we place all the monitors to allow us to see what's happening at different parts of the vision path.  
This is where we place all the monitors to allow us to see what's happening at different parts of the vision path. Mainly it contains the large multiview screen for the vision mixer and the director.  


== Power ==
== Power ==
Line 9: Line 9:
== Signal ==
== Signal ==


The signal cables are ended with BNC connectors and numbered from 1 to 18. The numbering starts from the top left of the rack, and goes left to right, top to bottom with 18 being bottom right. The inputs for these are located in the patch bay.
The monitors are connected to the OB unit currently being used in the studio via a COAX cable to a distribution panel near the unit behind the sound station which is converted from HDMI by a [[Blackmagic Micro Converters|converter]].


== Usage ==
The [[Computing:Stream Encode Server|Stream]] monitor is fed directly via HDMI from a capture card in the server rack.


The current usage is:
*5 - [[Stream]]
*6 - [[Computing:Video Server|Vidsrv]]
*9 - Prog
*10-12 - [[ATEM 1 M/E|ATEM]] inputs 1-3
*15 - Prev
*16 - Prog
*18 - ATEM input 4
[[Category:Technical]]
[[Category:Vision Path]]
[[Category:Vision Path]]

Latest revision as of 09:30, 23 July 2021

tick.png HD OK
The monitor rack as of 11/11/2013. HEY FIX THIS NEED A NEW PHOTO

This is where we place all the monitors to allow us to see what's happening at different parts of the vision path. Mainly it contains the large multiview screen for the vision mixer and the director.

Power

The monitor rack is fed power from circuits 1 and 2 in the control room. Circuit 1 powers the left side, while 2 does the right.

Signal

The monitors are connected to the OB unit currently being used in the studio via a COAX cable to a distribution panel near the unit behind the sound station which is converted from HDMI by a converter.

The Stream monitor is fed directly via HDMI from a capture card in the server rack.