Dual rail Power Supply PSU

From YSTV Documentation Wiki
Revision as of 20:39, 23 December 2009 by Malcolm.chambers (talk | contribs) (Initial page, straight from old site)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

I haven't seen this mythical box I don't think.--Malcolm.chambers 20:39, 23 December 2009 (UTC)

This is a separate box to make getting it PAT tested easier. Inside is a RF filtered IEC mains inlet, a 20mm fuseholder and a LASCAR power supply board, which provides +- 15V and +5V using linear regulators. A pair of 10-turn presets on the board allow the adjustment of the symetrical output voltages.

The output is via a length of starquad cable to a 4-pin DIN plug to connect to the NetMuxBreakout itself. The cores in the cable are show below.

Connection Colour Pin
+15V Red 2
-15V Blue 1
+5V White 3
0V Green, Screen 4


There isn't an on-off switch because it's intended to be on all the time, and there isn't a power on indicator because the box will probably be hidden out the way. The front of the NetMuxBreakout will have power indicators.

Retrieved from "https://docs.ystv.co.uk/index.php?title=Dual_rail_Power_Supply_PSU&oldid=277"