HowTo VT Op

Part of the HowTo Live Op series.

The VT Op controls the playout of pre-recorded content (with was originally stored on video tapes) during a live show.

Studio show responsibilities

Pre-show

• Load PiVTDesktop and connect to vtsrv.
• Add all VTs to vtsrv.
• Create/load playlist of VT's to play.
• Check all VTs play as intended.
• Check all VT audio is within required levels.

Show

• Play VTs under direction of the Director.
• Keep Director notified of time remaining on playing VTs.
• Count Director out of VTs.

Post-show

• Remove all VTs from vtsrv.
• Close any software used.

Guide

Pre-show

PiVTDesktop can be started by double-clicking on the shortcut on the desktop. In 'Settings'->'Connection Settings', set server to 'vtsrv.dyn.ystv.york.ac.uk', port to '9815' and click on connect. 'Add' button should then be enabled.

VTs should be stored within the shows folder within Show Resources (normally mounted as R:\) and can be copied to VTSrv using Winscp.