mNo edit summary |
No edit summary |
||
| Line 26: | Line 26: | ||
===Mark III (June 2015 - Present)=== | ===Mark III (June 2015 - Present)=== | ||
Following an unexpected windfall of funding from Greg Dyke, Kenobi was rebuilt and upgraded to HD in June 2015. The [[ATEM 1 M/E]] mixer bought in 2013 was replaced in the Studio by a newer 4K model, and was reassigned for use on OBs. OB1 was temporarily replaced by [[Computing:Ystvedit2|Edit 2]], which was installed with the Intensity capture card and a Decklink Extreme 3. This allowed for the same machine to both stream/record and output fill and key CasparCG graphics. | Following an unexpected windfall of funding from Greg Dyke, Kenobi was rebuilt and upgraded to HD in June 2015. The [[ATEM 1 M/E|ATEM 1 M/E Production Switcher]] mixer bought in 2013 was replaced in the Studio by a newer 4K model, and was reassigned for use on OBs. OB1 was temporarily replaced by [[Computing:Ystvedit2|Edit 2]], which was installed with the Intensity capture card and a Decklink Extreme 3. This allowed for the same machine to both stream/record and output fill and key CasparCG graphics. | ||
With the rebuild, the patch panels were rearranged. The BNC and Comms patches were moved to the bottom to reduced the strain on the umbilicals, while the rest of the I/O patches were raised to table-height. The XLR-4 PDU 'Fan Tray' was put into use for its intended purpose, with the XLRs patched to the same panel as Comms. Meanwhile, a splitter box was made so that the contents of the shelf - all of which run at 5V or 12V - could also be powered by this PDU. | With the rebuild, the patch panels were rearranged. The BNC and Comms patches were moved to the bottom to reduced the strain on the umbilicals, while the rest of the I/O patches were raised to table-height. The XLR-4 PDU 'Fan Tray' was put into use for its intended purpose, with the XLRs patched to the same panel as Comms. Meanwhile, a splitter box was made so that the contents of the shelf - all of which run at 5V or 12V - could also be powered by this PDU. | ||
| Line 37: | Line 37: | ||
Kenobi currently contains the following equipment: | Kenobi currently contains the following equipment: | ||
* OB1 | * OB1 | ||
* ATEM 1 M/E | * ATEM 1 M/E Production Switcher | ||
* [[Computing:PiVT|TauVT]] | * [[Computing:PiVT|TauVT]] | ||
* Netgear 24-port switch | * Netgear 24-port switch | ||
edits