No edit summary |
No edit summary |
||
| Line 29: | Line 29: | ||
With the rebuild, the patch panels were rearranged. The BNC and Comms patches were moved to the bottom to reduced the strain on the umbilicals, while the rest of the I/O patches were raised to table-height. The XLR-4 PDU 'Fan Tray' was put into use for its intended purpose, with the XLRs patched to the same panel as Comms. Meanwhile, a splitter box was made so that the contents of the shelf - all of which run at 5V or 12V - could also be powered by this PDU. | With the rebuild, the patch panels were rearranged. The BNC and Comms patches were moved to the bottom to reduced the strain on the umbilicals, while the rest of the I/O patches were raised to table-height. The XLR-4 PDU 'Fan Tray' was put into use for its intended purpose, with the XLRs patched to the same panel as Comms. Meanwhile, a splitter box was made so that the contents of the shelf - all of which run at 5V or 12V - could also be powered by this PDU. | ||
At the start of Autumn 2015, OB1 was rebuilt with newer hardware (an Intel i3 stolen from a teaching PC). It was found at Woodstock that having a single machine handling streaming, recording and graphics caused not only significant performance issues at high load, but is somewhat catastrophic when things went wrong. This, amongst other reasons, led to a single Decklink Duo being installed in OB1. When required, OB graphics is currently being handled by the studio Graphics PC. | |||
Following complete failure of the HP console, it was removed at the start of Spring 2016. | |||
====Contents==== | ====Contents==== | ||
Kenobi currently contains the following equipment: | Kenobi currently contains the following equipment: | ||
* | * OB1 | ||
* ATEM 1 M/E | * ATEM 1 M/E | ||
* [[Computing:PiVT|TauVT]] | * [[Computing:PiVT|TauVT]] | ||
* Netgear 24-port switch | * Netgear 24-port switch | ||
* Wireless Tally | * Wireless Tally (Arduino Mega with Ethernet Shield and XBee) | ||
* Argosy 14 IEC PDU | * Argosy 14 IEC PDU | ||
* XLR-4 PDU 'Fan Tray' | * XLR-4 PDU 'Fan Tray' | ||
edits