216
edits
Technical To Do: Difference between revisions
m
→Technical To Do
No edit summary |
|||
| Line 6: | Line 6: | ||
* <del>s-vid/comp bodge on white hd cam.</del> | * <del>s-vid/comp bodge on white hd cam.</del> | ||
* <del>Fix weird termination issue on the wide cam from York Come Dancing.</del> | * <del>Fix weird termination issue on the wide cam from York Come Dancing.</del> | ||
This seems to be DaVEp169's "5 in". I noticed that If Camera 1 DA is sent to Mux 1,2,3, or 4 and DaVE 1, 2, 3, or 4 is set as an output, the output looks fine. Therefore not a Camera 1 DA termination issue. DaVE 1,2,3,4 in come directly out of DaVE P169 A,B,C,D (ideally, currently DaVE 2 in is permanently set to Camera 2 since DaVE P169 B was unreliable). Since the problem is displayed on the DaVE 1 monitor (attached to DaVE 1 DA) '''''and''' DaVE out it can't be a DaVE 1 DA termination issue. | |||
I tested this theory thoroughly. Edit 1 DA currently displays colour bars from MAX so I used that. I took three colour bar outputs from Edit 1 DA, and barrelled them to the BNCs which come from cameras 1,2,3 in patch panel 71,72,73. This showed the problem was on Camera 1. Camera 2 is wired up differently from 1 and 3 due to the DaVE P169 B out issue. I swapped over terminators on Camera 1 DA with Camera 2 DA, and DaVE 1 DA wth DaVE 2 DA. In both cases the prblem was still with camera 1. | I tested this theory thoroughly. Edit 1 DA currently displays colour bars from MAX so I used that. I took three colour bar outputs from Edit 1 DA, and barrelled them to the BNCs which come from cameras 1,2,3 in patch panel 71,72,73. This showed the problem was on Camera 1. Camera 2 is wired up differently from 1 and 3 due to the DaVE P169 B out issue. I swapped over terminators on Camera 1 DA with Camera 2 DA, and DaVE 1 DA wth DaVE 2 DA. In both cases the prblem was still with camera 1. | ||
| Line 31: | Line 32: | ||
'''<u>Odd Tasks</u>:''' | '''<u>Odd Tasks</u>:''' | ||
* Make shorter Xlr cables for studio use. | |||