Tally (Roxanne): Difference between revisions

The power connector is fairly obvious, anything doing more than about 7 volts should suffice, the 12 volt ones will do perfectly and it has an internal regulator. The RF-45 connector goes to a length of Cat-5 cable running to the splitter in the studio, and the male DB-9 connector (like a monitor connector) goes to the [[Magic_DaVE|vision mixer]]. This has a slightly special cable, it's shown in the picture, but is a purple cable with a block plug on one end and a yellow on the other, should be easy to spot. Finally the female DB-9 connector can be run to a PC for serial communication. This means even when vision mixer input channels are reassigned and moved around on account of have 5 or more sources, the correct brick lights up when a camera is mixed to.