Transmission Light

Revision as of 15:49, 9 October 2021 by liam.burnand (talk | contribs) (→‎Design)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

This is the thing that says whether you are transmitting, rehearsing, or both.

Design

This light is controlled by an Arduino using get requests over ip, this then triggers the corresponding relay, usage of this

Relay control cable

Cat5 cable terminated with DB9.

pin 1 = tx +12v (Orange)
pin 2 = tx GND (Brown)
pin 3 = rh +12v (Blue)
pin 4 = rh GND (Green)

Retrieved from "https://docs.ystv.co.uk/index.php?title=Transmission_Light&oldid=3322"