Netmux audio wiring: Difference between revisions
From YSTV Documentation Wiki
|
|
| Line 1: |
Line 1: |
| {{Outofdate}}
| | #REDIRECT [[Net Mux]] |
| This page aims to track the wiring of various cables within the breakout.
| |
| | |
| === Mux Connection Leads ===
| |
| | |
| These are all made up using 8-core screened lead. The screen is connected to ground in all the leads, and carries no signal because all the audio is balanced. There will be a total of two Group 1 cables, two group 2 cables and two output cables needed, one of each for the top (Net) and bottom (Stream) audio muxes. The two right-hand side connectors (seen from the back of the mux) are unused because the system is mono.
| |
| | |
| === Input Group 1 ===
| |
| | |
| {|border="1"
| |
| |-
| |
| !Mux Channel
| |
| !Source
| |
| !Pin
| |
| !Colour
| |
| |-
| |
| !1
| |
| !Sound Desk +
| |
| !13
| |
| !Brown
| |
| |-
| |
| !1
| |
| !Sound Desk -
| |
| !12
| |
| !Yellow
| |
| |-
| |
| !2
| |
| !??? +
| |
| !24
| |
| !Black
| |
| |-
| |
| !2
| |
| !??? -
| |
| !23
| |
| !White
| |
| |-
| |
| !3
| |
| !OB Input +
| |
| !10
| |
| !Purple
| |
| |-
| |
| !3
| |
| !OB Input -
| |
| !9
| |
| !Green
| |
| |-
| |
| !4
| |
| !??? +
| |
| !21
| |
| !Red
| |
| |-
| |
| !4
| |
| !??? -
| |
| !20
| |
| !Blue
| |
| |}
| |
| For some reason I can't remember what channels 2 and 4 were for, and why it's those numbers which are blank.
| |
| | |
| | |
| === Input Group 2 ===
| |
| | |
| {|border="1"
| |
| |-
| |
| !Mux Channel
| |
| !Source
| |
| !Pin
| |
| !Colour
| |
| |-
| |
| !12
| |
| !Digital +
| |
| !21
| |
| !Yellow
| |
| |-
| |
| !12
| |
| !Digital -
| |
| !20
| |
| !Brown
| |
| |-
| |
| !13
| |
| !Analogue +
| |
| !7
| |
| !Green
| |
| |-
| |
| !13
| |
| !Analogue -
| |
| !6
| |
| !Purple
| |
| |-
| |
| !14
| |
| !Vidserv +
| |
| !18
| |
| !White
| |
| |-
| |
| !14
| |
| !Vidserv -
| |
| !17
| |
| !Black
| |
| |-
| |
| !15
| |
| !Inform +
| |
| !4
| |
| !Red
| |
| |-
| |
| !15
| |
| !Inform -
| |
| !3
| |
| !Blue
| |
| |-
| |
| !16
| |
| !Silence +
| |
| !15
| |
| !Wire link
| |
| |-
| |
| !16
| |
| !Silence -
| |
| !14
| |
| !Wire link
| |
| |}
| |
| Channel 16 is associated with clock and puts silence on air. It has a wire link across the pins inside the D connector and no connection to the outside world.
| |
| | |
| | |
| === Output Cable ===
| |
| | |
| {|border="1"
| |
| |-
| |
| !Mux Output
| |
| !
| |
| !Pin
| |
| !Colour
| |
| |-
| |
| !1
| |
| !+
| |
| !4
| |
| !Purple
| |
| |-
| |
| !1
| |
| !-
| |
| !3
| |
| !Green
| |
| |-
| |
| !2
| |
| !+
| |
| !15
| |
| !Red
| |
| |-
| |
| !2
| |
| !-
| |
| !14
| |
| !Blue
| |
| |}
| |
| Outputs 1 and 2 are the same signal from independent line drivers in the NetMux unit.
| |
| [[Category:Technical]]
| |
Latest revision as of 15:20, 11 July 2013
